全自动凝胶净化-浓缩-固相萃取/气相色谱-质谱法测定紫皮石斛中有机磷农药残留

建立了以凝胶渗透色谱(GPC)和固相萃取(SPE)净化、气相色谱-质谱(GC-MS)法同时测定紫皮石斛中10种有机磷农药残留的方法。样品用乙腈超声提取,提取液经GPC去除类脂杂质和大分子物质,后经Envi-Carb/NH2固相萃取柱净化,选择离子(SIM)监测模式检测,外标法定量。在26min内10种农药得到很好的分离,农药残留量在0.02~0.5μg/mL,方法的线性良好,相关系数为0.997 3~0.999 9,农药加标浓度为0.05mg/kg和0.2mg/kg时,加标回收率在70.4%~115.8%,相对标准偏差在2.8%~9.6%,满足国家标准要求,检出限为0.005 2~0.011mg/kg。方法简便、快速、灵敏、准确,能够运用于石斛中多组分有机磷农药残留的定性和定量分析。     

Structural Elucidation of Trace Amounts of Volatile Compounds Using the Crystalline Sponge Method

Volatile organic compounds are widely present as scents and odors in our daily lives and are readily found in a variety of natural extracts. Because these compounds are highly volatile and usually available only in minute quantities, little attention has been paid to X‐ray diffraction as a technique for their structure determination. Here, we show that the structures of volatile organic compounds are easily elucidated using minute quantities of the compounds and the crystalline sponge method. The compound vapors can be directly absorbed into the sponge crystals, or alternatively, preparative gas chromatography can be used to separate the desired compound from a natural mixture.     

IrIII‐based Octahedral Metalloligands Derived Primitive Cubic Frameworks for Enhanced CO2/N2 Separation

We developed a metalloligand strategy to construct porous frameworks, viz. the combined use of Ir^III‐based octahedral metalloligands and the linear unit [Ni(cyclam)] easily afforded two isostructural complexes 1 and 2 with primitive cubic frameworks. Both complexes show good CO₂/N₂ separation property.     

惰气脉冲熔融热导法测定铌钛合金中氢含量

为准确测定铌钛合金中氢含量,使用LECO-404氢分析仪,采用惰性气氛脉冲加热熔融试样,热导法测定。研究了不同的脱气功率对空白值和试样分析值的影响,选择了脱气功率为4 500 W。通过助熔剂实验,选择了0.50g锡作为铌钛合金中氢释放的助熔剂。验证了钛标准样品的适用性。确定了分析功率为3 500 W,最短积分时间为60s。精密度实验中氢含量测定的相对标准偏差(RSD)为2.5%~5.5%,加标回收率为97.82%~104.5%,可以准确测定铌钛合金中氢含量。研究结果对准确测定铌钛合金中氢含量具有指导意义。     

Characterization of odorous contaminants in post‐consumer plastic packaging waste using multidimensional gas chromatographic separation coupled with olfactometric resolution

The increasing world population with their growing consumption of goods escalates the issue of sustainability concepts with increasing demands in recycling technologies. Recovery of post‐consumer packaging waste is a major topic in this respect. However, contamination with odorous constituents currently curtails the production of recycling products that meet the high expectations of both consumers and industry. To guarantee odor‐free recyclates, the main prerequisite is to characterize the molecular composition of the causative odorants in post‐consumer plastic packaging waste. However, targeted characterization of odorous trace contaminants among an abundance of volatiles is a major challenge and requires specialized and high‐resolution analytical approaches. For this aim, post‐consumer packaging waste was characterized by sensory analysis and two‐dimensional high resolution gas chromatography coupled with mass spectrometry and olfactometry. The 33 identified odorants represent various structural classes as well as a great diversity of smell impressions with some of the compounds being identified in plastics for the first time. Substances unraveled within this study provide insights into sources of odorous contamination that will require specific attention in the future in terms of screening and prevention in recycling products.     

Preparation and evaluation of a novel bonded imidazolium ionic liquid as stationary phase for gas chromatography

1‐Butyl‐3‐[(3‐trimethoxysilyl)propyl]imidazolium chloride ionic liquid was synthesized and chemically modified onto the inner wall of a fused capillary column as a stationary phase for gas chromatography. The 1‐butyl‐3‐[(3‐trimethoxysilyl)propyl]imidazolium chloride ionic liquid bonded capillary column was evaluated in detail. The results revealed that the ionic liquid bonded capillary column exhibited high column efficiency of 1.08 × 10⁴ plates/m, and good chromatographic separation selectivity (α ) for polar and non‐polar substances, and a good thermal stability between room temperature and 400°C. Moreover, the determination of thermodynamic parameters and the linear solvation energy relationship were further carried out. The results indicated that the chromatographic retention of each probe molecule on the ionic liquid bonded stationary phase was an enthalpy‐driven process, and the system constants of the linear solvation energy relationship signified that the dispersion interaction, the hydrogen bonding acidity and hydrogen bonding basicity were dominant interactions between probes and stationary phase among five interactions during the chromatographic separation. However, the contribution of each specific interaction for the stationary phase is ranked as the dispersion interaction > the hydrogen bonding basicity > the hydrogen bonding acidity.     

Comparison of ultra high performance supercritical fluid chromatography,ultra high performance liquid chromatography,and gas chromatography for the separation of synthetic cathinones

A comparison of ultra high performance supercritical fluid chromatography, ultra high performance liquid chromatography, and gas chromatography for the separation of synthetic cathinones has been conducted. Nine different mixtures of bath salts were analyzed in this study. The three different chromatographic techniques were examined using a general set of controlled synthetic cathinones as well as a variety of other synthetic cathinones that exist as positional isomers. Overall 35 different synthetic cathinones were analyzed. A variety of column types and chromatographic modes were examined for developing each separation. For the ultra high performance supercritical fluid chromatography separations, analyses were performed using a series of Torus and Trefoil columns with either ammonium formate or ammonium hydroxide as additives, and methanol, ethanol or isopropanol organic solvents as modifiers. Ultra high performance liquid chromatographic separations were performed in both reversed phase and hydrophilic interaction chromatographic modes using SPP C18 and SPP HILIC columns. Gas chromatography separations were performed using an Elite‐5MS capillary column. The orthogonality of ultra high performance supercritical fluid chromatography, ultra high performance liquid chromatography, and gas chromatography was examined using principal component analysis. For the best overall separation of synthetic cathinones, the use of ultra high performance supercritical fluid chromatography in combination with gas chromatography is recommended.     

Quantification of fatty acids in erythrocytes and plasma by fast gas chromatography

As a result of the heterogeneous nature of lipid classes in complex biological matrices such as plasma and erythrocytes, it is imperative to have a robust and validated methodology for fatty acid quantification. The effective method presented here combines available methodology of fast gas chromatography and an improvement of the sample preparation methodology before injection into the gas chromatograph. This methodology ensures complete transesterification and quantification of total and individual fatty acids (and not only in relative amounts) by addition of internal standards. We considered sample preparation key, and we established the use of lysis buffer and ethanol for erythrocytes and plasma sample preparation, respectively. Fatty acid profile was determined by acid methylation and fast gas chromatography equipped with a flame ionization detector. The triacylglycerol 13:0, phosphatidylcholine 23:0, and methyl esters 21:0 were used as internal standards. Within the linearity of the calibration, the ratio of the peak area of each fatty acid over the peak area of the internal standard was constant (coefficient of variation ≤ 2.5). Satisfactory repeatability <15% and intermediate reproducibility < 15% were observed. Finally, this validated method was applied to a pre‐clinical trial that investigated the impact of dietary fats on accretion of specific fatty acids in plasma and erythrocytes.     

侵入气体沿井筒的上升规律研究

地层气体侵入井筒后形成气液两相流动体系,气体沿井筒向上滑脱运移,随着所受压力的降低其发展变化过程会很快,如果不及时处理就会演变为井涌、井喷,甚至井喷失控.因此,准确的预测侵入气体沿井筒的上升规律,有助于认识气侵发展过程,同时为现场采取井控措施提供理论依据,有效避免井下复杂事故.基于侵入气体沿井筒运动的力学特性,建立了气体的上升速度模型,模型模拟分析表明:地层渗透率越高、机械钻速越快、单位时间内侵入井筒的气体量越多、气体上升速度越快,井底压力波动越大;施加一定的井口回压可以有效抑制气体的膨胀运移.